Typical Data Sheet

Fields followed by an asterisk (*) are required.

Date:
Name:
Address:
Company:
Contact:
Telephone:
Fax :
E-mail:

Quantity:
KVA:	/  AA /  FA Prov. FA
Phase:	3 1
Hz:	60 50/60
Temperature rise:	150 130 115 80  °C
Insulation class:	220 °C

Primary tension
Tension:
BIL:	10 20 30 45 60 95 125 150  kV
Configuration:	Delta  Wye
Material:	Cu  Al

Secondary tension
Tension:
BIL:	10 20 30 45 60 95 125 150  kV
Configuration:	Delta  Wye
Material:	Cu  Al

Impedance:	% @ T Rise + 20 C 135 100 170  °C
Noise level:	dB
K-Ractor Load Profile:	None 1 4 7 9 13 20

Primary taps: 4 only 2.5% Taps, 2FCAN, 2FCBN (Off load - bolted links)

Core & coils only:
MAX. Dimensions:
Height:	"
Width:	"
Depth:	"
Max. Weight:	Lbs

Enclosure Type:	None 1 2 3R 4 12
MAX. Dimensions:
Height:	"
Width:	"
Depth:	"

Options	Yes / No	Details
Special conditions	No Yes	Alt. Std. Above 1000   Interior  Outdoor   Amb. T°C: 40 max 50 max
Electro Static Shield	No Yes	Between High and Low Voltage windings
Temperature Indicator	No Yes	Dial Type  Digital Type  c/w 1 N.O.+ 1 N.C. contact
Provision for fan cooling	No Yes	Motor 120 volts a.c. (Fan kits not included)
Fan cooling	No Yes	Motor 120 volts a.c. (120 volts a.c. source not included)
Lightning Arrestors	No Yes	kV  class. Type Distribution  Intermediary  Station
Grounding Resistor	No Yes	Volt.   Ohms.   Amps.
Ground bus bar	Yes	Standard 0.25 X 2.0 cu
Special paint color	No Yes
Hinged Doors	No Yes
Mechanical interock	No Yes
Provision for Padlock	No Yes
Epoxy Vacuum Impregnation	Yes	Standard
Primary coordination	No Yes	Prov. for Incoming Cables Bus to End To H.V. equipment c/w Flexible Connectors Prov. for Bus Duct
Secondary coordination	No Yes	Provision for Outgoing Cables Bus to End To L.V. equipment c/w Flexible Connectors Prov. for Bus Duct
Standard production test	No Yes	Per IEEE/ANSI C57.12.91/CSA C-9
Heat run test	No Yes	Extra if required On one unit only Type test report from equiv. unit
Noise level test	No Yes	Extra if required On one unit only Type test report from equiv. unit
Basic impulse level	No Yes	Extra if required On one unit only Type test report from equiv. unit
Corona test	No Yes	Extra if required On one unit only Type test report from equiv. unit
Witnessed test	No Yes	Extra if required On a unit only Type test report from equiv. unit
Certified test report	No Yes	Copies
Instruction manual	No Yes	Copies
Losses evaluation (watts)	No Yes	$   / No-load Losses  $   / Load Losses

Notes and Special feature :